Aluminum Frame Cutting Machine
Aluminum frame cutting machine is a new type of metal mill. The inside of the body shall be pulverized without mesh, and frame cutting machine can shatter thin material and thick material. The number of hammerheads can be crushed to a dense mass, which can be made directly out of the material. First, use the hammer to break up the material, which can be torn apart by the comparison. Then it can be broken by the hammer and finally the material. The cnc aluminum cutting machine structure is reasonable, the use is more convenient, especially the service life of vulnerable parts increases greatly.
Attention should be paid to the use of aluminum frame cutting machine:
the shearing machine opens the pressure gauge switch during the shear process to observe the oil pressure value, and may not increase the pressure on the shear material, thus causing the cutting machine to be damaged.
when operating, the shearing machine should stop to check if there is noise.
different blade clearance must be adjusted for different plate thickness when shearing machine is cut.
start the cutting machine to make a number of loops, and make sure that aluminum frame cutting machine under normal conditions, the different thickness plates should be cut from thin to thick
How to improve the structure stiffness of the shearing machine, especially hydraulic shearing machines? The measures we can take are:
for the components of the shearing machine, including the bed, the column, and other supporting parts, the selection should be made rationally.
the relative deformation magnitude and direction of the force point should be accurately measured and known, and some corresponding compensation measures should be taken to improve the structural rigidity of the equipment.
the structural layout of the shearing machine should be reasonable. For some heavy moving, it should be arranged as far as possible in the middle of the member, so as to minimize the deformation caused by the weight or cutting force.
for reinforcement bars of supporting parts, reasonable arrangements should be carried out.
Add:Bowang District Industrial Area, Ma’anshan, Anhui, China
Company: SHANGHAI DAVIS INDUSTRY MANUFACTURE GROUP CO.,LTD